High Satisfaction Customized Double Colors Injection Molding Machine Production of Cup

• Customization: Available
• Structure: Horizontal
• Plastic Type: Thermoplastic
• Model NO.: HXS160
• Plasticizing Way: Screw Type
• Clamping Way: Hydraulic & Mechanical
• Automation: Automatic
• Computerized: Computerized
• Certification: CE, ISO9001:2008
• Energy Saving: Servo Energy Saving
• After Sales Service: Engineers Avaiable to Service Machine
• Voltage: According to Countries
• Showroom Locate: Malaysia,Indonesia,Turkey,Mexico,Uzberkistan
• Condition: 100% New
• Machine Weight: 8.5 Ton
• Transport Package: Standard Packing
• Specification: 5.00x1.71x1.71
• Trademark: HIGHSUN
• Origin: China
• HS Code: 847710
• Production Capacity: 7000sets/Year
• Package Size: 500.00cm * 171.00cm * 171.00cm
• Package Gross Weight: 8500.000kg

Product Description

HXS Two colors Plastic Injection Moilding Machine
a. SUPER ENERGY SAVING
Output power varies with the load, and no energy is wasted. In the holding pressure phase, the servo motor willreduce speed, with low energy consumption; during the cool-down period, the motor does not work, with zero power consumption. Compared with the ordinary injection molding machines, it can save 20%-80% of the power.
b. HIGH PRECISION AND HIGH STABILITY
Equipped with the precise pressure sensor and rotary encoder, it can respectively monitor and feed back on flow and pressure. Based on the feedback, the high performance synchronous servo motor will adjust flow and pressure accordingly by changing the speed and torque. The closed-loop control can ensure the stability of product quality.
c. HIGH RESPONSE AND HIGH EFFICIENCY
The driving system responses with high sensitivity . It takes only 0.05 seconds to reach maximum value. The response speed is much faster than the ordinary injection molding machines. In that way, it significantly shortens the cycle time and increases the production efficiency.

MODEL:HXS160
TECHNICAL PARAMETER TABLE			A/B
INJECTION UNIT	SCREW DIAMETER	mm	22	25	28		32	36
	SCREW L/D RATIO	L/D	22	22	22		23	21
	INJECTION CAPACITY IN THEORY	cm3	49	63	80		132	167
	INJECTION WEIGHT(PS)	g	44	58	72		120	152
		oz	1.5	2.0	2.5		4.2	5.3
	INJECTION PRESSURE	MPa	382	296	236		297	234
	INJECTION RATE	g/s	63	82	103		82	103
	PLASTICIZING CAPACITY	g/s	4	6	9		11	13.6
	SCREW SPEED	rpm	300
CLAMPING UNIT	CLAMPING FORCE	KN	1600
	MOVING MOULD-PLATE STROKE	mm	400
	MAX. MOULD HEIGHT	mm	550
	MIN. MOULD HEIGHT	mm	230
	SPACE BWTWEEN TIE-BARS (W*H)	mm	720*420
	HYDRAULIC EJECTOR FORCE	KN	33
	HYDRAULIC EJECTOR STROKE	mm	100
	EJECTOR NUMBER	n	3*2
	WHEEL DIAMETER	mm	750
OTHERS	PUMP PRESSURE	MPa	17.5
	MOTOR POWER	KW	16+16
	HEATING CAPACITY	KW	7			10.5
	MACHINE DIMENSION (L*W*H)	m	5.23*1.65*2.07
	MACHINE WEIGHT	t	8.5
	OIL TANK CAPACITY	L	380
	BEARING CAPACITY OF ROTARY PLATEN	t	0.8