Short Cycle Plastic Injection Molding Machine High-Speed 260 Tons for Spoon, Fork, Thin-Wall Box, Take-Away Box

• Customization: Available
• After-sales Service: 24 Hours Service Online
• Warranty: 24 Months
• Model NO.: HXH-260 high speed machine
• Type: Plastic Injection Molding
• Structure: Horizontal
• Plastic Type: Thermoplastic
• Plasticizing Way: Screw Type
• Clamping Way: Hydraulic & Mechanical
• Automation: Automatic
• Computerized: Computerized
• Certification: CE, ISO9001:2008
• Energy Saving: Servo Energy Saving
• After Sales Service: Engineers Avaiable to Service Machine
• Voltage: According to Countries
• Showroom Locat: Malaysia,Russia,Turkey,Uzberkistan
• Condition: New
• Machine Weight: 10 Ton
• Transport Package: Standard Packing
• Specification: 6.49*1.8*2.11 M
• Trademark: HIGHSUN
• Origin: China
• HS Code: 8477101090
• Production Capacity: 7000sets/Year

Product Description

TECHNICAL PARAMETER TABLE		A	B
Screw diameter	mm	50	55
Screw L/D ratio	L/D	24	22
Injection capacity in theory	cm3	422	510
Injection weight (Ps)	g	384	464
Injection pressure	MPa	161	133
Injection speed	mm/s	320
Plasticizing Capacity	g/s	57	80
Screw speed	r/min	400
Clamping force	kN	2600
Opening stroke	mm	530
Max mold height	mm	600
Min mould height	mm	230
Space between tie-bar	mm	610*560
Ejector force	kN	80
Ejector stroke	mm	150
Ejector No	n	13
Pump pressure	MPa	17.5
Motor power	KW	30+30
Heating power	KW	17.8
Machine dimension	m	6.49*1.8*2.11
Machine weight	t	10
Oil tank capacity	L	560

HIGHSUN thin-wall high speed IMM series is based on years of experiment and researching,specifically for the molding cycle is short,high speed injection molding requirement products,Outstanding performance in the aspects of motion characteristics,machine precision,sevice life and so on.Widely used in packaging,medical and 3C electronic products.
Product advantages:
1.With CANbus EtherCAT bus communication,the compuer sustem is full digital controlled.
2.The temmperature contral adopts special control module,The accuracy can achieve 1 degree.
3.With the power monitoring function,it can monitor the current energy consumption during the production.
4.The special single cylinder strcture drastically reduces the return-oil amount during the high speed injection.At the same time,it reduces the return-oil pressure,In this way,it increases machine injectuib acceleration.
5.In using the graphite steel sets as well as thin oil lubrication,the bent elbow connecting rods and guide bars have better bearing resistance and abrasive resistance,The machine has a longer service life.
6.Controlled by the proportional direction valve,The movement can accelerate quickly.During the high speed running,it can operate steadity and precisely control the mold open position.
7.The hydraulic system adopts double servo drive control.It has the advantages of high effciency,energy saving and low noise.Meanwhile,it can realize mold-open and charge sunchronization function.